This shop uses cookies and other technologies so that we can improve your experience on our sites.

Packages

A SINGLE package contains 1pc of the sleep monitoring device of your choice.

DUAL is a compact package of two sleep monitoring devices for partners. Put one device on each side of the bed to monitor sleep for both yourself and your partner. When using two devices, a function called pair tracking cross-checks signals from both Phasers against each other and cleans them out, so any signal from your partner is removed from your data.

Sleep Phaser V3

Sleep Phaser is the tricorder for your sleep. It's the thing all the sleep health advocates have been waiting for.

  • It tracks your sleep phases for a smart alarm.

  • Wake-up light
    Sun rise
  • Breathing measurement
    Breath
  • It's contactless and comfortable. Sleep Phaser-like sleep sensor sits on your bedside table. No wires. No hardware in your bed.
  • The sensor for measuring actigraphy is passive. No high-energy radio! Monitoring works via passive infrared detection. The main deflector dish stays offline.
  • The light turns off after 30 minutes.
  • For better sleep, there are 3 light modes: white, yellow, and red.
  • It has 4 nonskid points on its bottom.
  • Touch Control
  • Powered by adapter
  • There is possible to set only one very low-intensity mode for all-night lighting.

Dimensions: Length x Width x Height - 75x75x155 mm

What's new in current version 2021

We are still working on improving our devices, and we respond to your feedback.

Why Sleep Phaser?

Compared to other standalone sleep tracking solutions, Sleep Phaser is:

  • comfortable and simple to set up (no plastic discs in bed, no special mattress needed, nothing to wear, just a bedside light)
  • low (less than half the price of some competitor products)
  • not radio-based (only low-energy Bluetooth is used to connect to your smartphone, whereas the sensor itself is infrared-light-based)
  • it can be powered with a charging cable or with AAA batteries (ideal for traveling)

The tech behind Sleep Phaser

At the heart of Sleep Phaser is a passive infrared sensor that senses how your body heat changes, and in an ideal setting, Sleep Phaser can also detect your breathing rate.

How to control it?

1. Connect your Sleep Phaser to the power supply.

2. The PIR sensor should point approximately to your shoulders. If you can see the sensor from your bed, then the sensor can “see” you.

3. It is effortless to control the Phaser – touch the top of the lamp, it switches between light modes with every touch (white - yellow - red - off)

It is set that the Phaser turns off the light after 30 minutes.

Applications for Sleep Phaser

Sleep as Android

Sleep Phaser connects to Sleep as Android to use its extensive arsenal of features:

  • A smart alarm that wakes you up at the perfect moment
  • Long-term sleep analysis with statistics
  • Cloud app for backup and desktop access to your data
  • Google Fit & Samsung Health integration
  • Automatization via Tasker and IFTTT
  • Dedicated support
  • it turns off the light automatically after 30 minutes when you are using it to fall asleep

And this is how it will look in Sleep as Android:

Sleep Phaser Remote Control V2

Tool for remote control Sleep Phaser.

  • Light on/off
  • Set own colors and intensity

Sleep Phaser Remote Control V2

Other application

Mindroid

Mindroid is an AVS (Auditory Visual Stimulation device - aka Mind Machine) app for Android.

(A wide range of sessions will help you to relax, energize, meditate, focus, learning, imagine and fall asleep.). Now it is an excellent anti-stress device.

Cover art

NEW - HRV Mind Machine

(Android and IOS)

Frequently asked questions

  • Plug adapter – You will receive the type of plug adapter according to the recipient country.

We have prepared documentation and source codes for developers to program their own applications to control your Sleep Phaser.

https://bitbucket.org/kolmanp/fluttersleepphaser/src/master/

Available for Android and iOS.

Sleep as Android app

Data sheet

Connectivity
Bluetooth
Supported operation system
Android

Specific References

EAN13
8594171220548
Grade 
Izaro T. 06/17/2021

Satisfied

It works

  • 1 out of 1 people found this review useful.
Grade 
Raymond S. 06/02/2021

Sleep Phaser

I used it for sunrise wake up and for contactless monitoring because I hate watch on my hand. First week I had to found the right place, because measurement not look good. But now it measures perfect with breathing too.

  • 1 out of 1 people found this review useful.
Grade 
Daniele Moro 01/08/2021

Overall good product

I was not impressed, the item is quite little and light you could think it's empty... I use it in conjunction with "Sleep as Android" app: does its job quite well, I like it lighting up when the alarm clock starts. Downside (for me): light is by far not enough to use it also as a reading light, so I end up with two lights on my bedside table.

  • 2 out of 2 people found this review useful.
Grade 
Hanz Muller 11/16/2020

FInally

Great product if you use the sleep as android app.

Grade 
Ralph Brown 11/15/2020

Very comfortable sleep monitoring

Finally, my Phaser arrived. I was already tired as I had to sleep with my phone or some gadget in the bad to monitor my sleep. It was uncomfortable. Several times, I´ve even threw my mobile out of bed, while moving. Now i just put a lamp on bedside table and can sleep without having to search for a mobile somewhere under the pillow or under the bed

  • 1 out of 1 people found this review useful.
Grade 
Kingdon Barrett 09/12/2020

Works perfect

I received my sleep phaser and everything is fine! Power works great. Seems to be doing a better job than the old motion sensor in the bed. <br />

  • 2 out of 2 people found this review useful.
Grade 
Eric 07/16/2020

Satisfied with the purchase

Got mine today! This is awesome! Top notch stuff! Keep it up guys! All working well. Like the sleep mask, but without the hassle of wires! Cheers

  • 1 out of 1 people found this review useful.
Grade 
Lauren 07/10/2020

works well, but plastic could be more precise

I am really enjoying the data and read out from the monitor. However, the manufactury could be better, the plastic parts did not fit well on my lamp

Grade 
A. Brooker 04/16/2019

Awesome gadget

I was little bit sceptical buying this product but i gave it a try. <br /> I've been using this product for more than two weeks now and i love it. Every morning I chceck my sleep overview and try to figure out what to do to improve my sleep.

Grade 
Dominik Li 11/27/2018

Better mornings

I hate mornings and waking up, but it´s a little bit better with Sleep Phaser. Sunrise effect as an alarm is really good.

Grade 
C. Johnson 11/25/2018

five stars

Got my Dual Phasers yesterday. Both work fine. Pleasant surprise about the high-end chargers included :)

Grade 
Iraviel88 11/21/2018

just PERFECT!

All I can say is…. AWESOME, AWESOME…AWESOME!!! The Sleep Phaser delivers all that I expected, and more. A great investment all around!!

Grade 
l. R. 11/08/2018

it works

I wasn't very impressed with this product at first, I had problems with connection to my phone. But after communicating with customer support, I managed to solve problems and now it works as it should

Grade 
Ajay John 11/07/2018

Great tracker, very sensitive

The phaser works flawlessly and I have not faced any connectivity issues till now.<br /> <br /> The tracking is also much more sensitive than just using sonar (as I did before). Sonar did detect breathing occasionally though, while the phaser hasn't detected my breathing yet.<br /> There is another minor bug by the way. During tracking, if I am detected in awake mode, instead of keeping the pee-light mode on, the phaser just turns on the LED lights in red color and immediately turns it off (Only the lights have this issue. Tracking is not affected).<br /> <br /> But, overall, I am quite impressed by the device and you guys have done a fantastic job. I am really looking forward to getting more control over the phaser lights via your app and via tasker/IFTTT.<br /> In fact, though I know I am totally jumping forward here, but in the long term future, if you could expose the phaser PIR sensor and LED light control via a REST API, the phaser could be integrated easily into many Smart Home Automation products, like Samsung SmartThings and Home Assistant.<br />

Grade 
Mary S. 11/01/2018

Helps to stop snoring

Thank you!!! - My husband snores while sleeping. I couldn´t sleep and was so tired of making “noises” to stop him to snore. But the phaser can do the “noises” instead of me. It´s GREAT!

Grade 
Ralph 08/30/2018

Very pleased. It is very accurate and helpful

A big thank you From Canada! I’ve had the sleep phaser for a week now. Worth the wait. Still trying to learn all the tricks to using it…love to have the sunrise light stay on after I turn off the alarm!<br /> However, the power cord might be longer. It does not reach the socket that is under my bed and I need to use an extension lead.

You might also like

Add Related products to weekly line up

in the same category

4 other products in the same category: